Canopy For Living Room

Canopy For Living Room

How to make a canopy bed

Dreaming about a comfortable refuge? Turn any bed into a cosy canopy bed using curtains and ceiling rails. Just follow our step-by-step guide below.

A bright, light bedroom with a canopy bed made with white curtains and the IKEA VIDGA track system.

A bright, light bedroom with a canopy bed made with white curtains and the IKEA VIDGA track system.

VIDGA curtain tracks on the floor around a bed to measure them for installation.

  • VIDGA Single track rail £6 /1.4 m

Step 1 Decide where you want the canopy by placing the track rails and corner pieces on the floor around your bed. Leave space for the curtains between the bed and the rails. The track rails come in one length, so you will likely need more than one to cover the bed's sides.

Someone cutting VIDGA track system rail pieces to the right length using a hacksaw.

  • VIDGA Single track rail £6 /1.4 m

Close-up of a rail from the IKEA VIDGA track system.

Step 2 Cut the rails to size with VIDGA cutting box and a hacksaw. Slide the connectors into the rails. Place all the rails and pieces on the floor around your bed again to double-check your plans and determine/measure where you'll need to drill. It helps to measure from your walls, not your bed.

A GIF of someone drilling holes in the ceiling and installing an IKEA VIDGA track system to create bed curtains.

  • VIDGA Single track rail £6 /1.4 m
  • VIDGA Ceiling fitting £3

Step 3 Mark your drill spots on the ceiling, drill the holes for the fittings and mount them. Be sure to use the appropriate screws/fasteners for your ceiling. Put the attachment piece into the fitting and click the rail into place. Repeat step three for all rail pieces, but do not attach the corner pieces yet.

Someone installing white VIVAN curtains in an IKEA VIDGA track system rail.

  • VIDGA Ceiling fitting £3
  • VIDGA Glider and hook £2.50 /24 pack

Step 4 Attach the hooks to the curtains and hang them on the gliders. The gliders/hooks are made for curtains with gathering tape, but you can add tape to curtains without it too. One 24-pack of gliders is enough for two curtains. Slide the gliders into the rails. (Do this as you put up each rail or wait until they're all set.)

A canopy bed with white curtains made using a ceiling mounted IKEA VIDGA track system.

Helpful hints We recommend our guide along with the assembly instructions and the VIDGA installation video. If buying a set, consider what's included. You may need to buy additional rails or fittings; connectors are not sold separately.

We love to see our customers get creative with our products. Go for it! But please note that altering or modifying IKEA products so they can no longer be re-sold or used for their original purpose, means the IKEA commercial guarantees and your right to return the products will be lost.

Made by
Interior designer: Britta Henley
Photographer: Tjitske van Leeuwen-Huisman
Writer: Marissa Frayer

Canopy For Living Room

Source: https://www.ikea.com/gb/en/ideas/how-to-make-a-canopy-bed-pub5ec9fd21

Posting Komentar

0 Komentar

banner